SpectraFuse AI
Combines IR with MS and UV-Vis data to suggest a structure.
Spectroscopy guide · Infrared (IR)
An IR spectrum shows which wavenumbers of infrared light a sample absorbs. Each absorption band comes from a bond vibrating, so bands in known places reveal functional groups. Read it in order: a strong band near 1700 cm−1 means C=O, a broad band near 3300 cm−1 means O–H or N–H, and C–H bands sit just below or above 3000 cm−1.
Read the plot · axes, shapes, regions
IR light (4000–400 cm−1) makes bonds stretch and bend. A bond absorbs only when its vibration changes the dipole moment, so polar C=O and O–H give strong bands.
Basics · vibrations
A band appears when the light matches a stretch or bend that changes the dipole. Stronger bonds absorb higher (Hooke’s law).
C=O strong band
| C≡C | ≈ 2150 cm−1 |
| C=C | ≈ 1650 cm−1 |
| C–C | ≈ 1200 cm−1 |
X-axis · wavenumber
Waves per centimetre (1/λ) in cm−1. It runs from 4000 on the left to 400 on the right, so energy falls left to right.
cm−1 = 1/λ
| 4000 | left edge, high energy |
| 1500 | zone boundary |
| 400 | right edge, low energy |
Y-axis · transmittance
100% at the top means no absorption, so bands point down. Absorbance plots show the same bands pointing up.
%T bands dip
| 100 % | no absorption |
| ≈ 0 % | very strong band |
| A | absorbance, peaks up |
Describe · every band
Call each band strong, medium or weak, and sharp or broad. A broad band usually means hydrogen bonding.
s m w br / sh
| strong | C=O, C–O |
| broad | H-bonded O–H |
| sharp | C≡N, ≡C–H |
Region 1 · bonds to H
O–H and N–H sit high. The 3000 line splits C–H: below it sp3, above it sp2 or sp.
O–H 3200–3550 broad
| O–H acid | 2500–3300 very broad |
| N–H | 3300–3500, –NH2 gives 2 |
| C–H sp3 | 2850–3000 |
| =C–H | 3000–3100 |
| CHO C–H | ≈ 2720 + 2820 weak |
Region 2 · triple bonds
Few bands live here, so any band stands out. Symmetric internal alkynes can vanish.
C≡N 2210–2260 sharp
| C≡C | 2100–2260 weak |
| CO2 | ≈ 2350, air path |
Region 3 · double bonds
C=O is usually the tallest band. Conjugation lowers it by about 20–30 cm−1.
C=O 1650–1850 strong
| C=C | 1620–1680 |
| Ar C=C | ≈ 1600 + 1475 |
| N–O | 1515–1560 + 1345–1385 |
Region 4 · fingerprint
Overlapping bands unique to each compound. Assign the strong known ones; match the rest against a reference.
C–O 1000–1300 strong
| CH3 bend | ≈ 1375 |
| CH2 bend | ≈ 1465 |
| Ar C–H oop | 690–900 |
| C–Cl | 540–785 |
Worked example · unknown C4H8O2
A colourless liquid with formula C4H8O2. This is its real spectrum (NIST, Coblentz No. 4802, solution). Six steps take you from bands to a structure.
(2 × 4 + 2 − 8) / 2 = 1C=O · uses the one double bond · no ring, no C=Cno O–H · butanoic acid (also C4H8O2) ruled out2980, 2938 < 3000 → sp3 C–H onlyC=O 1735 + C–O 1233 + 1044 → ester R–C(=O)–O–R′ethyl acetate · CH3COOCH2CH3 · PubChem CID 8857IR correlation table · functional groups
Ranges from Pavia and Silverstein. Carbonyl values are for saturated, open-chain compounds.
| Bond | Compound type, intensity and shape | Wavenumber (cm⁻¹) |
|---|---|---|
| O–H | alcohol, H-bonded · strong, broad | 3200–3550 |
| O–H | carboxylic acid · strong, very broad | 2500–3300 |
| N–H | amine / amide · medium; 2 bands for –NH2 | 3300–3500 |
| ≡C–H | terminal alkyne · strong, sharp | ≈ 3300 |
| =C–H | alkene / aromatic · medium | 3000–3100 |
| C–H | alkane (sp3) · medium to strong | 2850–3000 |
| C–H | aldehyde · weak, two bands | ≈ 2720 + 2820 |
| C≡N | nitrile · medium, sharp | 2210–2260 |
| C≡C | alkyne · weak | 2100–2260 |
| C=O | acid chloride · strong | ≈ 1800 |
| C=O | anhydride · strong, two bands | ≈ 1820 + 1760 |
| C=O | ester · strong | 1735–1750 |
| C=O | aldehyde · strong | ≈ 1725 |
| C=O | ketone · strong | ≈ 1715 |
| C=O | carboxylic acid · strong | 1700–1725 |
| C=O | amide · strong | 1630–1690 |
| C=C | alkene · medium to weak | 1620–1680 |
| C=C | aromatic ring · medium, pairs | ≈ 1600 + 1475 |
| N–O | nitro · strong, two bands | 1515–1560 + 1345–1385 |
| C–O | alcohol, ether, ester, acid · strong | 1000–1300 |
| C–Cl | alkyl chloride · strong | 540–785 |
Common mistakes
Fingerprint region
Assigning every fingerprint band. Below 1500 cm−1, assign only the strong, known bands (C–O, CH3 bend) and use the rest for matching.
Water, not alcohol
Calling any band near 3400 cm−1 an alcohol. Water in a wet sample or KBr disc gives a broad band there too, often with a band near 1640 cm−1.
The 3000 line
Missing the 3000 cm−1 line. C–H bands above 3000 mean an alkene, aromatic ring or alkyne; below 3000 mean only sp3 C–H.
CO2 in the air path
Reading the CO2 band near 2350 cm−1 as a triple bond. It comes from air in the instrument’s path, not the sample.
FAQ
The region below about 1500 cm⁻¹. It holds many overlapping bending and single-bond bands that are unique to each compound, so it is used to match a sample against a reference spectrum rather than to assign each band.
Between about 1650 and 1850 cm⁻¹, usually as the strongest band. Ketones absorb near 1715 cm⁻¹, aldehydes near 1725, esters at 1735–1750, amides at 1630–1690 and acid chlorides near 1800 cm⁻¹.
Both show O–H, but an alcohol gives a broad band at 3200–3550 cm⁻¹ with no C=O, while a carboxylic acid gives a much broader band from 2500 to 3300 cm⁻¹ together with a strong C=O near 1710 cm⁻¹.
Most IR spectra plot percent transmittance. Where the sample absorbs, less light gets through, so the trace dips. Spectra plotted as absorbance show the same bands pointing up.
A vibration absorbs IR only if it changes the molecule’s dipole moment. Symmetric bonds such as the C≡C in but-2-yne or the C=C in a symmetric alkene give weak or no bands; Raman spectroscopy sees them instead.
Usually an O–H group with hydrogen bonding (an alcohol, phenol or water). An N–H band sits in the same area but is narrower; a terminal alkyne C–H at 3300 cm⁻¹ is strong and sharp.
Sources