ISC ยท Class 11
Basic Volumetric Analysis Lab
Practise rinsing, pipetting, titration, endpoint detection, and concordant readings. To learn the basic workflow of volumetric analysis and obtain concordant titre readings.
Aim
To learn the basic workflow of volumetric analysis and obtain concordant titre readings.
Theory
Volumetric analysis uses a standard solution to determine an unknown concentration from a measured reaction volume.
Materials
- Burette
- Pipette
- Conical flask
- Standard oxalic acid
- Sodium hydroxide solution
- Phenolphthalein indicator
Procedure
- Rinse the burette and pipette with the correct solutions.
- Pipette a fixed volume into the flask.
- Add indicator.
- Titrate to a faint permanent endpoint and repeat for concordant readings.
Observations
- Rinse correctly: The burette and pipette are conditioned without dilution error. Rinsing with the solution to be measured prevents concentration changes.
- Endpoint reached: A faint pink colour persists for about 30 seconds. This is the endpoint for phenolphthalein in the acid-base titration.
- Overshoot: The solution turns deep pink and the titre is too high. Overshooting adds excess base, so the reading should be rejected.
Result
Concordant readings within a small range are suitable for calculating concentration.
Safety
Low-risk browser simulation. In a real lab, use a pipette filler and avoid mouth pipetting.
Checkpoint question
Why is a rough titre not usually used in the final average?
This page runs an interactive simulation of the experiment; enable JavaScript to use it.