BSc Physical ยท Surface Chemistry
Adsorption Isotherm of Acetic Acid on Charcoal
Shake acetic acid solutions with charcoal, titrate equilibrium concentration, calculate adsorption per gram, and interpret the Freundlich isotherm.
Theory
Adsorption on charcoal removes acetic acid from solution until equilibrium is reached. The Freundlich relation x/m = K C^(1/n) is tested by comparing adsorption per gram with equilibrium concentration.
Apparatus
- Activated charcoal
- Acetic acid solutions
- Stoppered bottles
- NaOH titrant
- Phenolphthalein indicator
Observations
- 0.05 M initial acid: Equilibrium concentration after shaking is 0.024 M. x/m = (0.050 - 0.024) x 50 mL / 1.00 g = 1.3 mmol/g. Dilute solution shows measurable adsorption with many vacant surface sites.
- 0.10 M initial acid: Equilibrium concentration is 0.056 M after titration. x/m = (0.100 - 0.056) x 50 mL / 1.00 g = 2.2 mmol/g. Adsorption increases as equilibrium concentration rises.
- 0.20 M initial acid: Equilibrium concentration is 0.132 M. x/m = (0.200 - 0.132) x 50 mL / 1.00 g = 3.4 mmol/g. Increase is less than proportional, indicating partial surface saturation.
- Blank charcoal check: Blank titration shows small acid retention by glass and filtration. Corrected x/m subtracts blank uptake before plotting. Blank correction reduces systematic error in the isotherm.
Calculation
Amount adsorbed per gram equals (initial moles - equilibrium moles) divided by mass of charcoal. Equilibrium concentration is found by titration.
Safety
Keep bottles stoppered while shaking, avoid inhaling charcoal dust, and neutralize acidic titration waste before disposal.
This page runs an interactive simulation of the experiment; enable JavaScript to use it.