BSc Analytical ยท Redox Endpoint Analysis
Potentiometric Titration Lab
Use platinum and reference electrodes to follow Fe2+ titration with dichromate and identify the endpoint from the sharp potential jump.
Theory
In potentiometric redox titration, electrode potential follows the changing oxidized-to-reduced concentration ratio. The equivalence point appears as a steep inflection in the E versus volume curve.
Apparatus
- Platinum electrode
- Calomel reference electrode
- Potentiometer
- Fe2+ sample
- Standard K2Cr2O7 solution
Observations
- 8.0 mL dichromate: Potential is 322 mV while Fe2+ remains in excess. Delta E is still modest between readings. The solution is dominated by the Fe3+/Fe2+ buffer pair.
- 9.5 mL dichromate: Potential begins rising faster as Fe2+ concentration falls. The local slope increases before equivalence. A rapid potential change signals that the redox ratio is changing sharply.
- 10.0 mL dichromate: A sharp jump to 610 mV marks the equivalence region. Fe2+ molarity = 6 x 0.020 M x 10.0 mL / 25.0 mL = 0.048 M. The maximum slope in E versus volume identifies the endpoint.
- 11.0 mL dichromate: Potential levels toward 684 mV once oxidant is in excess. Excess dichromate controls the electrode potential. The curve flattens after the endpoint as analyte is consumed.
Calculation
For dichromate titration, 1 mol Cr2O7(2-) oxidizes 6 mol Fe2+. The endpoint is located by the largest delta E per mL.
Safety
Acidified dichromate is toxic and oxidizing. Use small volumes, gloves, and labelled heavy-metal waste.
This page runs an interactive simulation of the experiment; enable JavaScript to use it.